[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][TeamRC17] Re: CBR wheels 4/4
Hi Rune!
Can I ask you about your cases?!
What kind of they are? There is place for 3 cases right?
I am looking forward to buy some during the winter (Here in Finland :)) and
yours looks like quite OK for me!
Did you make any modifications on it or it is as you got from the market?
I am interested in the brand and the type to be able to find out from where
I can order on the internet.
Thank you in advance
Csaba
-----Original Message-----
From: teamrc17-bounce@xxxxxxxxxxxx
[mailto:teamrc17-bounce@xxxxxxxxxxxx]On Behalf Of Rune Dalmo
Sent: Saturday, October 30, 2004 3:17 PM
To: teamrc17@xxxxxxxxxxxx
Subject: [TeamRC17] CBR wheels 4/4
Finally, here is a picture showing how I resolved the rear brake issue.
The caliper and mounting bracket is from the CBR. Welded a piece of
aluminium onto the bracket so that it rests gently against the swingarm.
Had to weld some flat steel onto the swingarm to keep the bracket from
moving backwards when holding the bike on the rear brake uphill.
--
Rune
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.781 / Virus Database: 527 - Release Date: 10/21/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.781 / Virus Database: 527 - Release Date: 10/21/2004
---
Send e-mail to 'ecartis@xxxxxxxxxxxx' with 'unsubscribe teamrc17' in
the message subject to unsubscribe from this list.