[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TeamRC17] Re: The state of Viking's engine...

To: teamrc17@xxxxxxxxxxxx
Subject: [TeamRC17] Re: The state of Viking's engine...
From: Steve Oxley <Stephen.Oxley@xxxxxxxxxxxxxxxxx>
Date: Tue, 10 Feb 2004 08:45:52 +1100
Delivered-to: viking@valhalla.its.monash.edu.au
In-reply-to: <000c01c3eee5$a6126250$44a655c3@p4>
References: <C901F491-5A88-11D8-8E8F-000393D558D6@its.monash.edu.au><000c01c3eee5$a6126250$44a655c3@p4>
Reply-to: teamrc17@xxxxxxxxxxxx
Sender: teamrc17-bounce@xxxxxxxxxxxx

On 09/02/2004, Jeroen wrote:

*okay, it sounds a little silly, but what's the correct english word for
those clicking tools with a 3/8" or 1/2" square notch where you can put a
thingy on for either loosening or tightening bolts or nuts?

There's probably some technical name for them, but everyone I know simply calls them a ratchet handle or socket driver.

So what's the Dutch word for them? :-)

Cheers,
Viking

---
Send e-mail to 'ecartis@teamrc17.net' with 'unsubscribe teamrc17' in
the message subject to unsubscribe from this list.

Follow-Ups:
- [TeamRC17] ratchet handle / socket driver
  - From: Jeroen Deen

References:
- [TeamRC17] The state of Viking's engine...
  - From: Steve Oxley
- [TeamRC17] Re: The state of Viking's engine...
  - From: Jeroen Deen

Prev by Date:[TeamRC17] CBX color Code
Next by Date:[TeamRC17] Re: New owner of a CBX750F
Previous by thread:[TeamRC17] Re: The state of Viking's engine...
Next by thread:[TeamRC17] ratchet handle / socket driver
Index(es):
- Date
- Thread